At last we are testing a full metal hot end, that include an Alluminium X-carriage and an universal mounting plate for the extruder.
0 Comments
Sometimes, even with a good printer calibration can happen that during printing it is coming displaced on x-or Y axes, Most of the time this is happening because of mechanical problem. but sometimes the mechanical part is not guilty.
At last, we will be able to supply our customers also with the aluminum frame for the Prusa i3.
The first frame for sale available starting from Monday 27/05/2013 As usual, at the best price on the market. Although, there can be many reasons that can cause artifact on the Z axis of 3d printers I want to refer to the article posted on the reprap magazine issue 1 page 29.
Many of the most common problems can be solved reading this article. Sometimes it happen that the flow rate of the plastic into the hot end is not stable, Consequently you can get trouble with your printed parts.
Plastic parts for Prusa Mendel V2 already completed.
Material: ABS Color: Yellow ready for shipment just from tomorrow morning Here is a picture of two pieced of filament for 3 mm ABS. Of course the Yellow one is a good piece and unfortunately the blue one ..is not!! Is a matter of fact, that when you buy filament from different supplier you have to change some parameter in your slicer software. But sometimes even with the best setting you get in trouble with your prints and you waste a lot of material and time looking for a solution. We want to share with all of you our experience about a filament that we bought on the polish market some week ago. Anyway, that filament was not so cheap, so we did not think the supplier was an improvised filament producer. AS follow we describe what we found and the problems we had. Now printing a prusa i3 plastic parts for Box frame
|